OhioLumex Products - AKMC-1 WATER HARDNESS MONITOR

PRODUCTS

PRODUCTS | ACCESSORIES

AKMC-1 WATER HARDNESS MONITOR

METHOD
On-line potentiometry

PRINCIPLE OF OPERATION
Is based on potentiometric determination of the total content of calcium and magnesium ions.
The instrument allows for variation in the temperature of the flow.

Description

- Continuous on-line monitoring
- High stability of the performance characteristics of solid-state electrodes
- Unaffected by coexisting suspended particulate matter
- Stable hydrodynamic conditions of the primary potentiometric transducer functioning
- Automatic correction for variations in the flow temperature
- Two-point calibration
- Multiple sample streams
- Programmable sample intake rate
- Microprocessor based control
- Digital data processing
- Nonvolatile memory
- Self-test diagnostics
- NEMA 4X wall enclosure

APPLICATIONS

Technological monitoring

Monitoring the operation of water preparation facilities of power plants
Monitoring the operation of artesian-well water softening facilities
Quality control of feed water for electrical power plants
Quality control of turbine condensate of steam power plants

Specifications

Measuring range	1 – 100 ppm
Sample temperature range	+ 0.5 to + 50 ºС
Sample pressure range	0.1 to 10 atm
Measuring rate	1 to 4 measurements per hour
Number of sampling points	1 to 4
Operating temperature range	+ 5 to + 50 ºС
Operating relative air humidity at + 25 оС	< 80 %
Operating atmospheric pressure	84 – 106.7 kPa
Status signal output NORM, ALARM, and LIMIT	NORM, ALARM, and LIMIT
Outputs	RS485, RS232, isolated 4 – 20 mA dc
Power requirements	ac 187 – 242 V, 50 ± 1 Hz, dc 12 V
Power consumption	100 W
Size	300×400×150 mm
Weight	20 kg

EQUIPMENT AND OPTIONS
AKMC-1 water hardness monitor
Kit of spare parts and accessories with a flow cell
Set of reagents for preparation of calibration solutions
Hydroseal (for analysis of water under overpressure)
Flow switching device and valves (for several sampling points)
Detector device (upon customer's request)

WARRANTY
AKMC-1 water hardness monitor is covered by an 18-month warranty.

SERVICES
Analysis of a technological process and recommendations to choose proper analyzer configuration.
Development of a scheme and design for installation of the analyzer (upon customer's request).
Our service engineers perform installation and commissioning of AKMC-1 water hardness monitor at Customer's site.
Consultations and initial training specific to the customer needs are given to the personnel.
Spare parts are delivered and repair is made upon customer's request (free within the warranty period).

The information and specifications in this publication are subject to change without notice.

Design NDA Solaris