Appendix K Long Term Testing Spiked Sorbent Traps
Appendix K Long Term Testing Vapor-Spiked Sorbent Traps at a
variety of spike levels are available for Long Term and Continuous
testing. These 10mm extra durable 3 section sorbent traps are
typically used from a 1-7+ day sampling and can be used when pulling
up to 1 liter per minute flow. They are all custom spiked for
extra spike retention at any level the customer requires.
| Ohio
Lumex Appendix K Long-term Testing Spiked Sorbent Trap |
|
On March 15, 2005, EPA issued the Clean Air Mercury Rule (CAMR)
to reduce and cap mercury emissions from coal-fired Power Plants.
The CFR 40, part 75 - Continuous Emissions Monitoring outlined
as Appendix K entitled "Quality Assurance and Operating Procedures
For Sorbent Trap Monitoring Systems" enable Power Plants
to use a low cost alternative to CEMMs, which have much higher
capital cost, installation/certification and maintenance cost.
Use of Sorbent Traps with the Direct analysis by Thermal Method
is allowed as a compliance reporting procedure by these regulations.
Mercury Emissions Testing Traps and portable Direct Sorbent Trap
analyzer available from Ohio Lumex satisfy the strict QA/QC procedures
outlined in the method.
| Appendix K Sorbent
Traps technical specifications |
- Spiked/Not Spiked 3 sections Sorbent Traps availabe
in all sizes - 6 mm and 10 mm OD; 4 sections traps
available for gas mercury specialization;
- Iodinated, acid washed coconut shell charcoal.
150 mg and 1 g loading on small/large trap section;
- Low mercury background levels - less then 1 ng
per section;
- Easy to remove and easy to set for “leak
check” cap plugs, color coded (blue caps for
spiked);
- Unique sample high temperature ID ink with chain
of custody sheet in protective pack;
- Size “Calibrated” extra thick glass
for trap rigidity;
- Customized Spiking level for 3rd section - 50
to 200,000 ng loadings available;
- 10% of every spiked traps batch analyzed and recorded
for QA/QC purpose;
- Rigorous QA/QC procedures at every manufacturing
step;
- Long term storage stability - one year;
- Long sampling duration - up to 2 weeks;
- High capacity mercury loading tested - up to
1,000,000 ng per section;
- Available immediately from stock with or without
analysis;
- Significant discounts on large quantities - contract
based orders;
- In-house analysis with short turnaround time.
|
|
View/Download documentation in PDF format:
|