top of page

Optical pH Sensors

PyroScience optical pH sensors utilize patented REDFLASH technology that guarantees fast and accurate pH measurements with no sample consumption. 


These pH sensors guarantee minimal cross-sensitivity to ionic strength and outstanding photostability that enable high sampling rates over long periods. The sensors work over a confined pH range (2 pH units) at high resolution and come in four different ranges: pH 4.0 - 6.0, 5.0 - 7.0, 6.0 - 8.0 and pH 7.0 - 9.0.

​

PyroScience recommends a 2-point calibration using PHCAL calibration capsules before every measurement. Please review the Optical pH Sensors User Manual for calibration tips.

 

Pick and choose from a variety of fiber-optic and contactless pH sensor options. Make sure to add the necessary accessories for complete system set-ups with the contactless sensors.

Fiber-Optic pH Probes

Contactless pH Probes

  • PHROBSC-PK5: pH 4.0 - 6.0 measurement range, 10cm long, 2m cable

  • PHROBSC-PK6: pH 5.0 - 7.0 measurement range, 10cm long, 2m cable

  • PHROBSC-PK7: pH 6.0 - 8.0 measurement range, 10cm long, 2m cable

  • PHROBSC-PK8: pH 7.0 - 9.0 measurement range, 10cm long, 2m cable

  • PHROBSC-PK8T: pH 7.0 - 9.0 measurement range (total scale), 10cm long, 2m cable

  • PHROBSC-PK8T-SUB: pH 6.0 - 8.0 measurement range, 10cm long, 2m cable, with -SUB connector

  • PHROBSC-PK8-SUB: pH 7.0 - 9.0 measurement range, 10cm long, 2m cable, with -SUB connector

  • PHROBSC-PK7-SUB: pH 6.0 - 8.0 measurement range, 10cm long, 2m cable, with -SUB connector

PHROBSC-PK5.jpg

PHROBSC-PK5

Robust Optical pH Probe Options for Liquid Samples
4mm tip diameter, response time (t90 <60 s), optically isolated, 4 exchangeable screw cap sensors

Specifications

  • PHSP5-PK5: measurement range pH 4.0-6.0, response time (t90 <60 sec), requires SPGLUE glue

  • PHSP5-PK5-ADH: measurement range pH 4.0-6.0, response time (t90 <60 sec), self-adhesive

  • PHSP5-PK5-ADH-STER: same as PHSP5-PK5-ADH plus sterilized

  • PHSP5-PK6: measurement range pH 5.0-7.0, response time (t90 <60 sec), requires SPGLUE glue

  • PHSP5-PK6-ADH: measurement range pH 5.0-7.0, response time (t90 <60 sec), self-adhesive

  • PHSP5-PK6-ADH-STER: same as PHSP5-PK6-ADH plus sterilized

  • PHSP5-PK7: measurement range pH 6.0-8.0, response time (t90 <60 sec), requires SPGLUE glue

  • PHSP5-PK7-ADH: measurement range pH 6.0-8.0, response time (t90 <60 sec), self-adhesive

  • PHSP5-PK7-ADH-STER: same as PHSP5-PK7-ADH plus sterilized

  • PHSP5-PK8: measurement range pH 7.0-9.0, response time (t90 <60 sec), requires SPGLUE glue

  • PHSP5-PK8-ADH: measurement range pH 7.0-9.0, response time (t90 <60 sec), self-adhesive

  • PHSP5-PK8-ADH-STER: same as PHSP5-PK8-ADH plus sterilized 

  • PHSP5-PK8T: same as PHSP5-PK8, but measurement range on total scale, requires SPGLUE glue

pH Sensor Spots.jpg

PHSP5-PK5

Optical pH Sensor Spot Options - Now Autoclavable
Requires transparent surface, fiber optic cables and adapters for complete setup

Specifications

Technical Note -ADH

Optical pH Flow-Through Cell Options - Now Sterilized
For inline monitoring, 1-500 mL/min recommended flow rate, response time (t90<90 sec)

Specifications

​

  • PHFLOW-PK5: range pH 4.0-6.0, sterilized w/25kGy beta-irradiation, no reference electrode required

  • PHFLOW-PK6: range pH 5.0-8.0, sterilized w/25kGy beta-irradiation, no reference electrode required

  • PHFLOW-PK7: range pH 6.0-8.0, sterilized w/25kGy beta-irradiation, no reference electrode required

  • PHFLOW-PK8: range pH 7.0-9.0, sterilized w/25kGy beta-irradiation, no reference electrode required

  • PHFTCR-PK5: measurement range pH 4.0-6.0, no reference electrode required, DISCONTINUED

  • PHFTCR-PK6: measurement range pH 5.0-8.0, no reference electrode required, DISCONTINUED

  • PHFTCR-PK7: measurement range pH 6.0-8.0, no reference electrode required, DISCONTINUED

  • PHFTCR-PK8: measurement range pH 7.0-9.0, no reference electrode required, DISCONTINUED

  • PHFTCR-PK8T: same as PHFTCR-PK8, but measurement range on total scale, DISCONTINUED

PHFLOW-PK5.jpg

PHFLOW-PK5

Optical pH Sensor Vial Options
With optical isolation, requires fiber cables and adapters for complete setup, 4 vials per pack

Specifications

  • PHVIAL20-PK7: with integrated pH sensor (range 6-8), ca. 20ml volume

  • PHVIAL20-PK8: with integrated pH sensor (range 7-9), ca. 20ml volume

  • PHTOVIAL20-PK7: with integrated oxygen, pH (range 6.0-8.0) and temperature sensors, ca. 20ml 

  • PHTOVIAL20-PK8: with integrated oxygen, pH (range 7.0-9.0) and temperature sensors, ca. 20ml 

  • PHTVIAL20-PK7: with integrated pH (range 6.0-8.0) and temperature sensors, ca. 20ml 

  • PHTVIAL20-PK8: with integrated pH (range 7.0-9.0) and temperature sensors, ca. 20ml 

PHVIAL20-PK7.jpg

PHVIAL20-PK7

pH Calibration Capsules
10 capsules per pack, each capsule results in 100mL buffer solution

Safety Data Sheet

  • PHCAL2: Buffer capsules for 100ml buffer (pH 2), for calibration of optical pH sensors

  • PHCAL11: Buffer capsules for 100ml buffer (pH 11), for calibration of optical pH sensors

PHCAL2.jpg

PHCAL2

Calibration pH Capsules

Cal Capsules
Contactless Sensor
Fiber-optic probes
Top of Page
Accessories

Necessary Accessories for Sensor Spots, Vials and Flow-through Cells

Compatible with Oxygen, pH and Temperature Contactless Sensors

  • SPFIB-BARE: optical fiber, for contactless readout, to measure through 0-2mm thickness, 1m length

  • SPFIB-LNS: optical fiber with lens, to measure through 3-10mm thick materials, 1m length

  • SPADBAS: Basic spot adapter, compatible to SPFIB-BARE, PICFIB2 or PICROD2, SPGLUE for fixation

  • SPFIB-BARE-CL2: same as SPFIB-BARE, 2m length

  • SPFIB-LNS-CL2: same as SPFIB-LNS, 2m length

  • SPFIB: optical fiber, for contactless readout, to measure through 0-2mm thickness, 1m length, ST-connector on both ends

  • SPGLUE: Transparent silicone glue Elastosil E43, (ca. 90 ml), for fixing sensor spots or SPADBAS

  • SPGLUE-KIT: Glueing kit with 1 spoon spatula (SPTLA), disposable syringe with screw cap, Luer-Lock fixture, 5 flat needles

  • SPTLA: 300mm long spatula for handling sensor spots, to position and fix sensor spot during gluing

  • ADVIAL20T: Adapter ring for 20mL vials with up to 3 sensors, compatible to SPFIB-BARE and PICFIB2

  • ADVIAL4T: Adapter ring for 4mL vials with up to 2 sensors, compatible to SPFIB-BARE and PICFIB2

  • SEPVIAL4: Septa with lids (with and without hole), for replacement in 4mL sensor vials

  • SEPVIAL20: Septa with lids (with and without hole), for replacement in 20mL sensor vials

  • ADPATCH: adhesive sticker patches, for piercing with protected O2 minisensors

  • PICFIB2: fiber for contactless readout with PICO-type meters only, for 0-10mm thick walls, 1m length

  • PICROD2: optical fiber rod, with PICO-connector, for 0-10mm thick walls, ca. 40mm length

  • PICROD3: optical fiber rod, PICO-connector, Ø = 3mm, 51.5mm length, for 0-20mm thick walls

  • PICFIB2-LNS: same as PICFIB2 but for 0-20mm thick walls

  • PICROD2-LNS: same as PICROD2 but with focusing lens, ideal for microfluidics

  • SPFIB-LNS-SUB: same as SPFIB-LNS, but with underwater SUB-connector (SUB)

  • SPFIB-LNS-CL2-SUB: same as SPFIB-LNS-CL2, but with underwater SUB-connector (SUB)

SPFIB-BARE-7cfc2246.jpg

SPFIB-BARE

pH Minisensors for Liquid Samples
500um tip diameter, fixed needle, tip protruding 5mm, response time (t90 <10 s), not optically isolated

Specifications

  • PHF500-PK6.5: pH 5.5 - 7.5 measurement range, 10cm long, 2m cable - NEW

  • PHF500-PK8: pH 7.0 - 9.0 measurement range, 10cm long, 2m cable - NEW

pH mini probe.JPG

PHF500-PK6.5

bottom of page